Tin Plated Breadboard PCB Solder Cable 24AWG 10CM White

Using a good quality cable ensures tight connections and does not cause any electricity leak or damage to the circuit. Having the best quality cable is very important in electronic and electrical projects. One such cable that is of the highest quality is Tin Plated Breadboard PCB Solder Cable 24AWG 10CM White. This type of cable is used by hobbyists, DIY projects, PCB circuits, and many other projects. Let us briefly talk about the characteristics of this cable in the following paragraphs.

Please explain what Tin Plated Breadboard PCB Solder Cable 24AWG 10CM White means?

The cable is 10 cm long and is small in length and small in diameter, and is used in connecting various components on a PCB or a breadboard. AWG means American Wire Gauge, which is the quality of the gauge of the wire. It is acceptable for the low-voltage load and does not tear or rip. It is white, so it is easy to distinguish when working with large arrays of colored cables. Its cable is made of tin and copper and is highly durable. It is effective and does not allow the wire to corrode. This makes it a durable wire and makes connections much better.

Where can we use Tin Plated Breadboard PCB Solder Cable 24AWG 10CM White?

It is used in the following setups

Breadboard Prototyping

These cables are great for temporary connections on a breadboard while testing or building your electronic circuit.

PCB Soldering

The tinned ends make them great for permanent connections on your PCB.

DIY Electronics Projects

Whether discussing Arduino, Raspberry Pi, or robotics projects, this cable is perfect for connecting your sensors, modules, and other components. Repair Work: It's handy for a quick fix or replacing a broken wire for small electronic devices.

Tin Plated Breadboard PCB Solder Cable 24AWG 10CM White

• This cable is formed of copper on the interior and tin on the surface. This is a terrific mix that gives the cable longevity and optimal electrical flow.
• It has a 24 AWG wire gauge suitable for different diy projects. This is made of good quality and can be used in low-power transmission projects. It can carry current safely without damaging the components.
• It has a cable that is 10 cm long, which is favourable for the PCD and breadboard.
• It is covered with a white colored plastic sheet.

Here is a jumper wire alternative if breadboarding is not your thing. This wire pack contains 10 pieces of dual tin wires, 10 cm in length. The inner diameter is 0.46mm, and the external diameter is 1.4mm. You can solder these wires directly to your electronic modules.

Both ends are exposed tin wires. These wires are convenient for direct soldering into PCB boards.

• Skin material: PVC
• Copper wire material: tinned copper
• Tail tinning: 3mm
• Color selection: red  black  white  yellow  green  blue
• Temperature: 40 - 85 C
• Line thickness: 1.4mm
• Voltage: 300V