Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Practical Solenoid for Maker, Student, and Prototype Builds
The Solenoid Lock Cabinet is a practical solenoid from Circuitrocks for students, makers, and repair-friendly builds. It fits well in projects that need linear actuation, while keeping setup straightforward for testing and prototype work.
Compared with generic parts, this product stands out through details such as solenoid. That makes it a solid choice for Arduino, ESP32, Raspberry Pi, robotics, motion-control, and workshop projects where matching the right part from the start saves time.
Important: Always match the electrical rating, size, and control method of this part with the rest of your setup before full-power testing.
Why you'll love it
- Straightforward linear action: adds useful value when choosing parts for a build
- Useful for lock or latch tasks: adds useful value when choosing parts for a build
- Simple trigger-based movement: adds useful value when choosing parts for a build
- Good for push-pull mechanisms: adds useful value when choosing parts for a build
What you can build
This product is a good fit for locks, push-pull actions, latches, and simple linear motion projects. It works especially well in student projects, quick repairs, and prototype builds where part availability, straightforward hookup, and predictable results matter.
Starter bundles
Plan for a matching power supply, a proper driver stage where needed, and a controller if you want timed, remote, or sensor-based operation.
Recommended add-ons
Useful add-ons include brackets, springs, latches, and a proper driver stage. You can also compare it with Solenoid Lock-style 12VDC, Solenoid Electromagnetic Lock.
Comparison table
| Compared Product | Best For | Key Difference | Direct Link |
|---|---|---|---|
| Solenoid Lock-style 12VDC | linear actuation | 12VDC | View product |
| Solenoid Electromagnetic Lock | linear actuation | Solenoid Electromagnetic Lock | View product |
| Solenoid Lock Round Tongue Mini Electric LY-01 DC12V | linear actuation | mini | View product |
Technical specifications
| Product | Solenoid Lock Cabinet |
|---|---|
| Brand | Circuitrocks |
| Product Type | Solenoid |
| Category | Locks & Latches |
| Primary SKU | ACS14427L |
| Product URL | https://circuit.rocks/products/lock-small-electric-cabinet-dc-12v |
Pinout & power notes
Drive the solenoid with a suitable transistor or relay and add proper protection where needed. The controller should only provide the signal, not the full load current.
What’s in the box
1 × Solenoid Lock Cabinet
Frequently Asked Questions
Can this work with Arduino or similar boards?
Yes, as long as the voltage, control method, and wiring match your controller and power supply.
Should I power it directly from a controller pin?
For small signal-only modules that may be fine, but motors, pumps, solenoids, and relays should use a proper driver or external supply.
Is this good for student and prototype builds?
Yes. It fits well in testing, learning, and proof-of-concept projects when matched with the right support parts.
How do I choose the right version?
Check the size, voltage, torque, speed, current, and fit details that matter most for your project.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →