• Water Hall Flow Sensor G1/2 - circuitrocks
  • Water Hall Flow Sensor G1/2 - circuitrocks
  • Water Hall Flow Sensor G1/2 - circuitrocks
1 3

Track Water or Liquid Flow with a Simple Sensor

The Water Hall Flow Sensor G1/2 is a hall effect flow sensor with uart designed for liquid metering, pump feedback, and water system monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.

Key details include Measurement Range: 1 to 30 Liters/Minute; Humidity Range: 35%–80% RH; Working Voltage: 5V to 18V DC (min tested: 4.5V).

Important: Flow readings depend on liquid type, pipe size, and mounting direction. Calibrate in your own system for the best result.

Why you’ll love it

  • Key feature: Sealed integrated magnetic hall effect sensor outputs an electrical pulse with every revolution
  • Useful spec: Hall Effect
  • Controller output: 5V TTL
  • Sensing range: 1 to 30 Liters/Minute
  • Power range: 5V to 18V DC (min tested: 4.5V)
  • Current draw: 15mA @ 5V

Compare with similar products

Product Sensor style Standout
Water Hall Flow Sensor G1/2 hall effect flow sensor with UART Current item
Water Flow Sensor G1 flow sensor hall-effect detection
Liquid Flow Meter - Plastic 3/4" NPS Threaded flow sensor hall-effect detection
Water Flow Sensor YF-S401 flow sensor SPI interface

What you can build

This sensor is a good fit for smart water meters, coolant flow alarms, dosing systems, beverage dispensers, and irrigation monitors.

Starter bundles

Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard or jumper wires for quick setup and testing.

Recommended add-ons

Useful add-ons include hose fittings, clamps, and a waterproof enclosure, depending on how you plan to power, mount, and log the sensor.

Technical specifications

Product Water Hall Flow Sensor G1/2
Sensor Type Hall Effect
Output Type 5V TTL
Measurement Range 1 to 30 Liters/Minute
Humidity Range 35%–80% RH
Working Voltage 5V to 18V DC (min tested: 4.5V)
Current Draw 15mA @ 5V
Accuracy ±10%
Pipe Size 1/2" nominal thread (0.78" OD)

Wiring & usage notes

Connect power and ground, then wire TX and RX to a serial-capable controller at the correct logic level and baud rate. Flow readings depend on liquid type, pipe size, and mounting direction. Calibrate in your own system for the best result.

What’s in the box

1 × Water Hall Flow Sensor G1/2

Frequently Asked Questions

What does the Water Hall Flow Sensor G1/2 measure? It is designed to measure magnetic field or magnetic presence.
Can I use it with Arduino, ESP32, or Raspberry Pi? Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
How do I connect this UART sensor? This version uses UART or serial output, so you connect power plus TX and RX at the correct logic level.
What affects accuracy? Power quality, wiring, mounting, target material, and the real environment can all affect the reading. It is best to test and calibrate in the final setup.
Is it good for prototyping? Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.

Water Hall Flow Sensor G1/2 - 1-30L/min YF-S201

Water Hall Flow Sensor G1/2 - 1-30L/min YF-S201

34 in stock

Product Code

AJ102

₱ 247.00
₱ 247.00
Sale Sold out
View full details

Related Post