Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Simple Load Switching for Arduino, ESP32, and Automation Builds
The Relay SPDT 10A 5V is a practical relay module from Circuitrocks for students, makers, and repair-friendly builds. It fits well in projects that need switching external loads, while keeping setup straightforward for testing and prototype work.
Compared with generic parts, this product stands out through details such as Normally closed valve, Normally open valve, 10A. That makes it a solid choice for Arduino, ESP32, Raspberry Pi, robotics, motion-control, and workshop projects where matching the right part from the start saves time.
Important: Always match the electrical rating, size, and control method of this part with the rest of your setup before full-power testing.
Why you'll love it
- Normally closed valve: stays shut by default until you energize it
- Normally open valve: stays open by default until you energize it
- 10A: gives you a quick spec reference before choosing the right part
- 5V: gives you a quick spec reference before choosing the right part
- Simple load switching: adds useful value when choosing parts for a build
What you can build
This product is a good fit for home automation, pumps, lights, fans, and controller-triggered switching tasks. It works especially well in student projects, quick repairs, and prototype builds where part availability, straightforward hookup, and predictable results matter.
Starter bundles
Most users pair this with Arduino, ESP32, or Raspberry Pi, along with jumper wires and a proper power source for the target load or sensor.
Recommended add-ons
Useful add-ons include terminal blocks, controller boards, and safe power wiring for your switched load. You can also compare it with Relay SPDT 10A 12V, Relay SPDT 10A 24V.
Comparison table
| Compared Product | Best For | Key Difference | Direct Link |
|---|---|---|---|
| Relay SPDT 10A 12V | switching external loads | 10A, 12V | View product |
| Relay SPDT 10A 24V | switching external loads | 10A, 24V | View product |
| 5V 10A 1-Channel Relay Module with Optocoupler (NO/NC) | switching external loads | 5V, 10A | View product |
Technical specifications
| Product | Relay SPDT 10A 5V |
|---|---|
| Brand | Circuitrocks |
| Product Type | Relay Module |
| Primary SKU | 2362 |
| Key Specs | 10A, 5V, normally open, normally closed |
| Product URL | https://circuit.rocks/products/relay-spdt-10a-5v |
Pinout & power notes
The low-voltage control side connects to your controller, while the load side uses COM, NO, and NC terminals. Keep the switched load wiring separate from the signal side.
What’s in the box
1 × Relay SPDT 10A 5V
Frequently Asked Questions
Can this work with Arduino or similar boards?
Yes, as long as the voltage, control method, and wiring match your controller and power supply.
Should I power it directly from a controller pin?
For small signal-only modules that may be fine, but motors, pumps, solenoids, and relays should use a proper driver or external supply.
Is this good for student and prototype builds?
Yes. It fits well in testing, learning, and proof-of-concept projects when matched with the right support parts.
What do COM, NO, and NC mean?
They are the switched load terminals. COM is common, NO is normally open, and NC is normally closed.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →