Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Measure Pressure with a Compact Sensor Module
The Flexiforce Pressure Sensor - 1lb is a flex sensor designed for barometric logging, tank checks, and fluid system monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.
Key details include Size: 216x14mm.
Why you’ll love it
- Detect contact and/or touch: Detect contact and/or touch
- Current draw: 2.5mA
- Compact size: 216x14mm
- Useful spec: < 5 ms
- Maker-friendly build: Easy to use in prototypes, classroom projects, and custom electronics
- Common controller support: Works well with Arduino, ESP32, Raspberry Pi, and similar boards
Compare with similar products
| Product | Sensor style | Standout |
|---|---|---|
| Flexiforce Pressure Sensor - 1lb | flex sensor | Current item |
| Flexiforce Pressure Sensor - 100lbs | flex sensor | pressure sensing |
| Water Pressure Sensor Analog Gravity | environmental sensor with analog output | analog output, pressure sensing |
| Air Barometric Pressure Sensor Digital 3.3-5V Liquid Water Level Controller | liquid level sensor with digital output | digital output, gas detection |
What you can build
This sensor is a good fit for altitude loggers, barometers, pump systems, tank pressure checks, and weather stations.
Starter bundles
Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard or jumper wires for quick setup and testing.
Recommended add-ons
Useful add-ons include tubing, adapters, and a display or logger, depending on how you plan to power, mount, and log the sensor.
Technical specifications
| Product | Flexiforce Pressure Sensor - 1lb |
|---|---|
| Max working current | 2.5mA |
| Size | 216x14mm |
| Response time | < 5 ms |
| Category | pressure sensors |
Wiring & usage notes
Check the pin labels on the Flexiforce Pressure Sensor - 1lb and match them to your controller voltage, ground, and signal pins. Keep wiring short and verify the logic level before powering the module.
What’s in the box
1 × Flexiforce Pressure Sensor - 1lb
Frequently Asked Questions
What does the Flexiforce Pressure Sensor - 1lb measure?
It is designed to measure pressure.
Can I use it with Arduino, ESP32, or Raspberry Pi?
Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
What affects accuracy?
Power quality, wiring, mounting, target material, and the real environment can all affect the reading. It is best to test and calibrate in the final setup.
Is it good for prototyping?
Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →