Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Measure Chemical Conditions with a Sensor Made for Embedded Projects
The Electrical Conductivity K10 Sensor Kit for Arduino is an ec sensor designed for water quality work, lab projects, and environmental monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.
Key details include Support Detection Range: 10~100ms/cm; Temperature Range: 0~40°C; Output Voltage: 0~3.2V.
Important: Most gas and chemical sensors work best after warm-up and calibration. Readings can drift with temperature, humidity, and sensor age.
Why you’ll love it
- Power range: 0~3.2V
- Sensing range: 10~100ms/cm
- Expected accuracy: ±5% F.S.
- Compact size: 42mm x 32mm
- Useful spec: Laboratory Grade
- Maker-friendly build: Easy to use in prototypes, classroom projects, and custom electronics
Compare with similar products
| Product | Sensor style | Standout |
|---|---|---|
| Electrical Conductivity K10 Sensor Kit for Arduino | EC sensor | Current item |
| Electrical Conductivity K1 Sensor Kit for Arduino | EC sensor with analog output | remote probe format |
| Atlas Scientific Conductivity K 1.0 Kit | EC sensor | remote probe format |
| pH Meter Sensor Analog Kit (Arduino Compatible) | pH sensor with analog output | analog output |
What you can build
This sensor is a good fit for water test rigs, hydroponics monitors, lab logging, aquarium control, and environmental stations.
Starter bundles
Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard or jumper wires for quick setup and testing.
Recommended add-ons
Useful add-ons include calibration solutions, probe holders, and a data logger, depending on how you plan to power, mount, and log the sensor.
Technical specifications
| Product | Electrical Conductivity K10 Sensor Kit for Arduino |
|---|---|
| Output Voltage | 0~3.2V |
| Support Detection Range | 10~100ms/cm |
| Temperature Range | 0~40°C |
| Supply Voltage | 3.0~5.0V |
| Measurement Accuracy | ±5% F.S. |
| Board size | 42mm x 32mm |
| Probe Type | Laboratory Grade |
| Probe Life | >0.5 year (Actual life is related to frequency of use and scene) |
Wiring & usage notes
Check the pin labels on the Electrical Conductivity K10 Sensor Kit for Arduino and match them to your controller voltage, ground, and signal pins. Keep wiring short and verify the logic level before powering the module. Most gas and chemical sensors work best after warm-up and calibration. Readings can drift with temperature, humidity, and sensor age.
What’s in the box
1 × Electrical Conductivity K10 Sensor Kit for Arduino
Frequently Asked Questions
What does the Electrical Conductivity K10 Sensor Kit for Arduino measure?
It is designed to measure electrical conductivity.
Can I use it with Arduino, ESP32, or Raspberry Pi?
Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
Does it need calibration?
Yes. Chemical and gas sensors usually need warm-up time, calibration, and periodic checking if you want stable readings.
Is it good for prototyping?
Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →