Thermocouple Type-K Glass Braid Insulated Stainless Steel Tip

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so it can be used in high temperature measurements such as heaters and ovens. There's a small piece of heat shrink on the connector ends of the wire to keep the fiberglass from fraying, and a 2 cm long  stainless steel probe on the opposite end.

• K type thermocouple with glass over-braiding
  
• Good up to 500°C (900°F)!
  
• Color-coded wires
  
• 1 meter long (a little more than 3 feet)
  
• Best used with a thermocouple amplifier such as the MAX31855, AD8495 or MAX31856

We have a handy tutorial which covers thermocouple use including both CircuitPython & Arduino libraries and example code! Also make sure to check the guide for the thermocouple amplifier you choose.

TECHNICAL DETAILS

• Wire length end-to-end: 39"