Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Repeatable Stepper Motion for CNC, Robotics, and Precision Control
The Stepper Motor 12VDC 32-Step 1/16 Gearing is a practical stepper motor from Circuitrocks for students, makers, and repair-friendly builds. It fits well in projects that need repeatable positioning, while keeping setup straightforward for testing and prototype work.
Compared with generic parts, this product stands out through details such as 12VDC. That makes it a solid choice for Arduino, ESP32, Raspberry Pi, robotics, motion-control, and workshop projects where matching the right part from the start saves time.
Important: Always match the electrical rating, size, and control method of this part with the rest of your setup before full-power testing.
Why you'll love it
- 12VDC: gives you a quick spec reference before choosing the right part
- Wireless control option: handy for cable-free testing and remote interaction
- Useful for precise movement: adds useful value when choosing parts for a build
- Works well in automated mechanisms: adds useful value when choosing parts for a build
- Good holding behavior for position tasks: adds useful value when choosing parts for a build
What you can build
This product is a good fit for CNC motion, camera sliders, valve control, indexing systems, and repeatable positioning projects. It works especially well in student projects, quick repairs, and prototype builds where part availability, straightforward hookup, and predictable results matter.
Starter bundles
Pair it with a suitable stepper driver, a matching power supply, a controller such as Arduino or Raspberry Pi Pico, and proper wiring for reliable motion tests.
Recommended add-ons
Helpful add-ons include drivers, couplers, lead screws, pulleys, and stable motor power supplies. You can also compare it with Stepper Motor 5VDC 32-Step 1/16 Gearing, Stepper Motor 42 x 42 x 23 mm 1.8 Degree Step Angle.
Comparison table
| Compared Product | Best For | Key Difference | Direct Link |
|---|---|---|---|
| Stepper Motor 5VDC 32-Step 1/16 Gearing | repeatable positioning | 5VDC | View product |
| Stepper Motor 42 x 42 x 23 mm 1.8 Degree Step Angle | repeatable positioning | 23 mm, 42 x 23 mm | View product |
| Stepper Motor Bipolar NEMA 17, 200 Steps/Rev, 42x38mm, 2.8V 1.7A | repeatable positioning | 200 Steps, 2.8V | View product |
Technical specifications
| Product | Stepper Motor 12VDC 32-Step 1/16 Gearing |
|---|---|
| Brand | Circuitrocks |
| Product Type | Stepper Motor |
| Primary SKU | RMS02812M |
| Key Specs | 12VDC, 32 step |
| Product URL | https://circuit.rocks/products/28byj-48-high-quality-stepper-motor-12v |
Pinout & power notes
A stepper motor should be used with a proper driver, not directly from a microcontroller pin. Identify the coil pairs first and match the driver current to the motor.
What’s in the box
1 × Stepper Motor 12VDC 32-Step 1/16 Gearing
Frequently Asked Questions
Can this work with Arduino or similar boards?
Yes, as long as the voltage, control method, and wiring match your controller and power supply.
Should I power it directly from a controller pin?
For small signal-only modules that may be fine, but motors, pumps, solenoids, and relays should use a proper driver or external supply.
Is this good for student and prototype builds?
Yes. It fits well in testing, learning, and proof-of-concept projects when matched with the right support parts.
Can I run this without a driver?
No. A stepper motor needs a proper driver to energize the coils in the right sequence.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Compatibility & downloads
// downloads
- Datasheet pdf
- ULN2003 datasheet pdf
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →