Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
The Solarbotics RW2 is a 1.1-inch diameter rubber wheel for 3 mm diameter output shafts. These wheels are sold individually, NOT in pairs.
The Solarbotics RW2 rubber wheel has a black, anodized aluminum hub with a generously thick silicone rubber tire for maximum traction (great for minisumo robots or fast line-following robots that need traction when rounding corners).
The rubber tire has a diameter of 1.1 inches (28 mm) and a width of 0.67 inches (17 mm), and it has a 20D durometer. The aluminum hub is drilled for an 3 mm axle. Secure the wheel to your motor shaft with the included 4-40 hex set screw (requires a 0.050-inch hex wrench). The wheel assembly weighs 12 grams. If you are looking to shave some width off your robot design, consider the Solarbotics RW2i wheel, which is a similar design with but has an internal set screw.
This high-traction wheel works with our 3 mm shaft gearmotors such as our micro metal gearmotors and the GM12a, GM13a, GM14a, and GM18mini metal gearmotors.
Included Parts
- One hub
- One tire
- One set screw
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →