Servo Motor Metal Gear MG995
Servo Motor Metal Gear MG995 - This servomotor MG995 is metal-geared, which gives more torque as well as wore gear strength. Its size is a standard-sized servo, which makes it easier to pair with most servo accessories like a servo horn, a servo bracket, and more. This servo uses 4.8V to 6V supply. The torque or the lifting power of this servo depends on the power supply it has. It can lift from 9.4kg-cm to 11kg-cm with power supply from 4.8V to 6V. The motor speed is 0.20 sec per 60° and 0.16 sec per 60°, respectively. Using a PWM signal from your Arduino board, you can control the angle of this motor. It needs PWM, PWR, and GND pins from your Arduino board only.
You might need an external power supply when powering up multiple servos at once since an MCU could only give an insufficient amount of current. It is suitable for projects that need an angle-controlled motor like a swaying ultrasonic sensor to check its surroundings.
The output shaft of a servo motor can be adjusted to a specific angular position through a coded signal. It will continue to retain the position of the shaft as long as continue to apply coded signals. The angular position of the shaft is supposed to change as soon as you change the codded signal. A usual sort of servo offers position control. Further, these mechanisms are commonly electrical or partially electronic in their natural approach. It uses an electric motor as the main tool for creating mechanical force. However, some other types of servo motors execute pneumatics, magnetic, and hydraulics principles.
Types of Servo Motors
The shape and size of a servo motor are critically dependent on the application. There are three-wiring concepts with standard servo motors that are particularly assigned for power, ground, and control. On the other hand, RC servo motors are other common types of motors used in robotic and hobby applications due to the eminent aspects like affordability, simplicity, and reliability.
Further, RC servo motors are low-power integrations that can be operated via small batteries and other DC supplies within the range of 100 mA to 2A. However, there’re also some high-power servo motors that can be powered from AC supplies and integrated into industrial units.
MG995 Metal Gear Servo Motor can be included in the bracket of a high-speed standard servo motor that can rotate approx. 180 degrees. The main application of these servo motors is in a helicopter, RC cars, airplanes, and many other RC models. Further, the digital servo motor accepts and processes PWM signals faster and in a better way. You can find a greatly sophisticated circuitry to ensure good torque, holding power, and faster updates in response to external forces.
The servo motor Metal Gear MG995 presents an attitude of high speed with a mighty torque of 10kg/cm. The components are packed in a tight sturdy plastic case to make the motor dust and water-resistant. It is an incredible feature in the development that allows its application in planes, RC Monster trucks, and boats. Also, the servo motor integrates a JR servo plug that is further compatible with Futaba connectors.
- Orange – Signal
- Red – Positive
- Brown – Negative
- Constant torque
- Good holding power
- High-quality motor
- Faster control response
4.8V: 130.54 oz-in (9.40 kg-cm)
6.0V: 152.76 oz-in (11.00 kg-cm)
4.8V: 0.20 sec/60°
6.0V: 0.16 sec/60°
|Weight:||1.94 oz (55.0 g)|
Length:1.60 in (40.7 mm)
Width:0.78 in (19.7 mm)
Height:1.69 in (42.9 mm)
|Pulse Cycle:||1 ms|