Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
This Mifare-One NFC tag can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.
The NXP TagWriter application will be helpful to format(NDEF exchange protocol) and easy to store the contacts, bookmarks, geo location, Bluetooth Handover, SMS, Mail, text messages and many more to NFC tags and stickers.
APPLICATIONS
- Contactless payment systems
- Bluetooth and Wi-Fi connections
- Social networking situations, such as sharing contacts, photos, videos or files
- Electronic identity documents and keycards
- Smartphone automation and NFC tags
SPECIFICATION
- Operating Frequency:13.56 MHz
- EEPROM storage: 1K Byte
- Default protocol: ISO14443A
- 4 Byte unique identifier
- Variable Identification distance:0~5cm
- Service life:>=10 years
- Service time:100,000 re-writes
- Material: ABS/PVC
- Size:3.2x2.8x2.5cm(1.26x1.10x0.98")
- Weight: About 3g
DOCUMENTS
SHIPPING LIST
- NFC Tag(Round) x1
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →