Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Spice up your security locks with this classic keychain RFID! The Mifare Classic Keychain electronic fob is based on an NXP S50 chip and contains a passive antenna. It works just like a Mifare Classic Card. It allows contactless transmission of data and supply power, meaning no battery is needed. Moreover, its operating distance is up to 100mm, depending on antenna geometry. It's a very handy piece of equipment to add to your workshop.
Specifications
- 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
- Built-in encryption engine with a 48-bit key
- 4 Byte unique identifier burned into the chip
- 13.56 MHz frequency
Inclusions: 1 x NFC Tag - Clear Diamond (MIFARE Classic 13.56MHz/1K S50)
Documents:
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →