Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
If you are looking for an antenna that has a long cable and could be mounted easily, this cable might be the answer to your problem.
This GSM antenna includes a magnetic base for easing mounting on metallic surfaces. It has a cable of 3 meters, making it possible to be used as an outdoor antenna and keeping its circuitry indoors. The cable is made of copper material, having less impedance than other cables. The antenna signal gain could be up to 2.5dBi. It also has an SMA connector end. The antennal could work with most GSM applications, as this has a working frequency of 900-1800 MHz.
You could use this cable for most GSM modules available. You could also use this on routers.
QUICK SPECS:
- Signal gain: 2.5dBi
- Frequency Rnage: 900 ~ 1800 MHz
- Output impedance: 50 Ω
- Standing wave ratio: <= 1.5 (dB)
- Interface type: SMA
- Cable length: 3 m(118.11")
- Height: 6 cm(2.36")
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →