1 2

Measure Pressure with a Compact Sensor Module

The Blood Pressure Sensor Serial Output is an environmental sensor with uart designed for barometric logging, tank checks, and fluid system monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.

Key details include Working Voltage: +5V, 200mA regulated; Serial Output: 9600 baud, 8 data bits, no parity, 1 stop bit.

Why you’ll love it

  • Key feature: Stores up to 60 measurements (view individually or all at once)
  • Fully automatic, high-accuracy readings: Fully automatic, high-accuracy readings
  • Sensor size: 2 meters
  • Controller output: 9600 baud, 8 data bits, no parity, 1 stop bit
  • Power range: +5V, 200mA regulated
  • Useful spec: Regulated supply input

Compare with similar products

Product Sensor style Standout
Blood Pressure Sensor Serial Output environmental sensor with UART Current item
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT environmental sensor with I2C STEMMA QT connector, pressure sensing
Water Pressure Sensor Analog Gravity environmental sensor with analog output analog output, pressure sensing
Barometric Pressure / Temperature MPL115A2 I2C Sensor environmental sensor with I2C I2C interface, pressure sensing

What you can build

This sensor is a good fit for altitude loggers, barometers, pump systems, tank pressure checks, and weather stations.

Starter bundles

Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard or jumper wires for quick setup and testing.

Recommended add-ons

Useful add-ons include tubing, adapters, and a display or logger, depending on how you plan to power, mount, and log the sensor.

Technical specifications

Product Blood Pressure Sensor Serial Output
Sensor Cable Length 2 meters
Serial Output 9600 baud, 8 data bits, no parity, 1 stop bit
Output Data Systolic, Diastolic, Pulse (ASCII format)
Working Voltage +5V, 200mA regulated
+5V Regulated supply input
GND Common ground
TX-OUT Serial data output (3V logic level)
Pinouts TX-OUT: Serial data output (3V logic level) +5V: Regulated supply input GND: Common ground

Wiring & usage notes

Connect power and ground, then wire TX and RX to a serial-capable controller at the correct logic level and baud rate.

What’s in the box

1 × Blood Pressure Sensor Serial Output

Frequently Asked Questions

What does the Blood Pressure Sensor Serial Output measure? It is designed to measure pressure.
Can I use it with Arduino, ESP32, or Raspberry Pi? Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
How do I connect this UART sensor? This version uses UART or serial output, so you connect power plus TX and RX at the correct logic level.
What affects accuracy? Power quality, wiring, mounting, target material, and the real environment can all affect the reading. It is best to test and calibrate in the final setup.
Is it good for prototyping? Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.

Adafruit Blood Pressure Sensor Serial Output - 1437

Adafruit Blood Pressure Sensor Serial Output - 1437

Out of stock

Product Code

1437

₱ 11,999.00
₱ 11,999.00
Sale Sold out
View full details

Related Post