Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
NiMH Rechargeable Battery Pack — 7.2V 350mAh (3×2 2/3-AAA 2/3-AAA Cells)
The Pololu NiMH Battery Pack 7.2V 350mAh (3×2 2/3-AAA 2/3-AAA) is a pre-assembled rechargeable pack perfect for powering robots, servos, and motor-driven projects. NiMH packs deliver consistent voltage under load and can be recharged hundreds of times.
For robotics: NiMH packs are popular for Pololu robots and servo-based projects because they handle high-current motor demands better than alkaline packs.
Technical specifications
| Chemistry | NiMH |
|---|---|
| Voltage | 7.2V nominal |
| Capacity | 350 mAh |
| Configuration | 3×2 2/3-AAA 2/3-AAA cells |
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →