Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Antenna with two bands: 2.4G, 5G, and 5.8G networks. Omnidirectional Wi-Fi signal antenna with a magnetic base. This rubber duck WiFi antenna will revolutionize WiFi communication with its exceptional qualities. These antennas provide coverage almost anywhere, including on campuses, in crowded urban areas, and within buildings. Available at all frequencies between 400 MHz and 5.8 GHz, they are used in commercial, military, and government institutions.
Features of WIFI Antenna 12dbi 2.4G 5.8G Dual Band Pole Antenna
- Frequency Range – 2400Mhz – 5800Mhz
- Bandwidth – 30Mhz
- Max Gain – 12dBi
- Max Power
- Input : 60W,
- Output : 50Ω
- Total Length – 22CM
- Type of Cable – RG174
- Type of Connector – SMA Male
- Magnetic Mounting
Benefits: WIFI Antenna 12dbi 2.4G 5.8G Dual Band Pole Antenna
- It has a stronger and stable connection throughout your location no dead zone, which interrupts your internet browsing.
- To ensure the connection, it has a flexible design so you can take it anywhere, whether to your office or house.
- With the plug-and-play features, it is very easy to install whenever you want.
- With the durable construction, it is for long-lasting use, and it provides a connection when you need it most.
FAQs about WIFI Antenna 12dbi 2.4G 5.8G Dual Band Pole Antenna SMA Male with Magnetic Base For Router Camera Signal Booster
Q1. What are the benefits of WIFI Antenna 12dbi 2.4G 5.8G Dual Band Pole?
Ans. It extended the coverage and range of signal performance, this 12dBi 2.4G 5.8G Dual Band Pole Antenna.
Q2. This antenna uses what type of connector?
Ans. It uses an SMA male connector.
Q3. With the magnetic base, what is the use of the magnetic base?
Ans. It is used for mounting on metal surfaces without drilling into the wall.
Q4. Can I use a WIFI Antenna 12dBi 2.4G 5.8G Dual Band Pole for security camera purposes?
Ans. If your camera supports SMA, make connections, it will work on 2.4G or 5.8GHz dual band.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →