Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Introducing a new generation in premium performance. The Turnigy Graphene Panther 75C is a powerful lipoly battery with an unbeatable cycle life and durability.
The continuous 75C discharge offers lower internal resistance and minimal voltage sag.
The low internal resistance remains consistent under different temperature circumstances, ranging from 5-52°C (41-126°F), to keep you racing during all seasons.
Others will be green with envy when they see the prestige of the Graphene 75C. The updated colour scheme creates a sleek, modern design that heralds a new era for Turnigy Graphene. Power up racing drones and high-performance EDF jets to enjoy a premium racing experience thanks to the Graphene 75C.
QUICK SPECS:
- Capacity: 1600mAh
- Cell Count: 4
- Voltage: 14.8V
- Constant Discharge: 75C
- Peak Discharge (3s): 150C
- Battery Size: 67x49x36mm
- Weight: 212g
- Pack Resistance: 14mΩ
- Charge Plug: JST-XH-5P
- Discharge Plug: XT60
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →