Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Practical Raspberry Pi Accessory for Maker, Student, and Prototype Builds
The Raspberry Pi 5 Official Case - Black with Fan is a practical raspberry pi accessory from Raspberry Pi for students, makers, and repair-friendly builds. It fits well in projects that need general project use, while keeping setup straightforward for testing and prototype work.
Compared with generic parts, this product stands out through details such as raspberry pi accessory. That makes it a solid choice for Arduino, ESP32, Raspberry Pi, robotics, motion-control, and workshop projects where matching the right part from the start saves time.
Important: Always match the electrical rating, size, and control method of this part with the rest of your setup before full-power testing.
Why you'll love it
- Made for Pi-based setups: adds useful value when choosing parts for a build
- Helps finish embedded builds: adds useful value when choosing parts for a build
- Useful in test benches: adds useful value when choosing parts for a build
- Easy to combine with Linux-based projects: adds useful value when choosing parts for a build
What you can build
This product is a good fit for Raspberry Pi builds, test benches, embedded kiosks, and controller setups. It works especially well in student projects, quick repairs, and prototype builds where part availability, straightforward hookup, and predictable results matter.
Starter bundles
It fits well in Arduino, ESP32, and Raspberry Pi projects, especially when matched with the right power source and controller.
Recommended add-ons
Popular add-ons depend on your build, but matching controllers, power supplies, and compatible motion parts usually make integration easier. You can also compare it with Stepper Motor HAT for Raspberry Pi, MonkMakes Raspberry Pi Robot Board v3 - Motor Driver HAT.
Comparison table
| Compared Product | Best For | Key Difference | Direct Link |
|---|---|---|---|
| Stepper Motor HAT for Raspberry Pi | repeatable positioning | Stepper Motor HAT for | View product |
| MonkMakes Raspberry Pi Robot Board v3 - Motor Driver HAT | DC motor speed and direction control | MonkMakes Raspberry Robot Board | View product |
| Adafruit 16-Channel PWM/Servo HAT for Raspberry Pi | general servo motion control | PWM | View product |
Technical specifications
| Product | Raspberry Pi 5 Official Case - Black with Fan |
|---|---|
| Brand | Raspberry Pi |
| Product Type | Raspberry Pi Accessory |
| Category | Circuit Board Protective Cases |
| Store Type | SBC Case |
| Primary SKU | 3045 |
| Product URL | https://circuit.rocks/products/raspberry-pi-case-for-pi-5-black |
Pinout & power notes
Check the power and connector orientation before plugging it into your Raspberry Pi setup. Use proper power budgeting if other accessories are connected.
What’s in the box
1 × Raspberry Pi 5 Official Case - Black with Fan
Frequently Asked Questions
Can this work with Arduino or similar boards?
Yes, as long as the voltage, control method, and wiring match your controller and power supply.
Should I power it directly from a controller pin?
For small signal-only modules that may be fine, but motors, pumps, solenoids, and relays should use a proper driver or external supply.
Is this good for student and prototype builds?
Yes. It fits well in testing, learning, and proof-of-concept projects when matched with the right support parts.
How do I choose the right version?
Check the size, voltage, torque, speed, current, and fit details that matter most for your project.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →