Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Keep Output Voltage Steady with Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
The Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5 keeps output voltage steady even when the input moves above or below the target level.
That makes it a good choice for battery systems, mobile robots, and field devices that need dependable power across a wide input range.
Important: Choose a regulator based on your full input-voltage range, startup current, thermal limits, and required headroom. Real output current depends on input voltage, airflow, and temperature.
Why you'll love it
- High efficiency: typically 85–95% (often >90%), so less heat and better battery life
- Power-saving at low load: quiescent current can be <0.1mA with no load
- Protections built-in: short-circuit + thermal shutdown
- Perfect for batteries: works across 2.7V to 11.8V input—use 4×AA, 9V battery, Li-ion packs, and more while still feeding stable 5V
- Tiny but capable: fits in tight builds (robot chassis, wearables, portable gadgets)
- Clean 3-pin wiring: only VIN, GND, VOUT , on 0.1″ spacing for breadboard/perfboard compatibility
What you can build
Useful for battery-powered devices, mobile robots, field instruments, and portable systems where the input can move above and below the target output.
Compare regulator options
| Model | Topology | Output | Max current |
|---|---|---|---|
| S7V7F5 | Buck-Boost | 5 V | — |
| S13V10F5 | Buck-Boost | 5 V | 1 A |
| D24V10F5 | Buck | 5 V | 1 A |
| S13V20F5 | Buck-Boost | 5 V | 2 A |
| D24V22F5 | Buck | 5 V | 2.5 A |
| D36V28F5 | Buck | 5 V | 3.2 A |
| D30V30F5 | Buck | 5 V | 3.4 A |
Technical specifications
| Product | Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5 |
|---|---|
| Brand | Pololu |
| Model | S7V7F5 |
| Category | DC-DC Step-Up/Step-Down Regulator |
| Topology | Step-Down (Buck) |
| Output Voltage | 5 V |
| Operating Voltage | 2.7-11.8 V |
| Support | Official Pololu product search and support resources linked below |
Official resources
Find this product on Pololu | Pololu support and resources
What’s in the box
1 × Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
Frequently Asked Questions
Can I power a microcontroller with this?
Yes, if the regulator’s output voltage and current match your controller and all attached loads.
Yes, if the regulator’s output voltage and current match your controller and all attached loads.
Will it run cool at full load?
It depends on input voltage, airflow, and load current. Check thermal limits in the official Pololu resources.
It depends on input voltage, airflow, and load current. Check thermal limits in the official Pololu resources.
Is this better than a linear regulator?
For many builds, yes. Switching regulators are usually more efficient and waste less heat.
For many builds, yes. Switching regulators are usually more efficient and waste less heat.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →