Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Measure Temperature with a Sensor Made for Embedded Builds
The NTC Thermistor Temperature Sensor Module 4pin is a thermistor temperature sensor with i2c designed for temperature logging, thermal control, and equipment monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.
Key details include Interface: Varies by module pins (commonly analog or I²C/SPI digital signals).
Important: Sensor response time depends on airflow, mounting, and thermal contact. Keep heat sources and self-heating from nearby parts in mind.
Why you’ll love it
- Key feature: Water Turbidity Detection Kit when your system touches water quality.
- Useful spec: temperature measurement and control
- Easy wiring: Varies by module pins (commonly analog or I²C/SPI digital signals)
- Power range: Confirm whether the module expects 3.3 V, 5 V, or a specific range before powering it.
- Maker-friendly build: Easy to use in prototypes, classroom projects, and custom electronics
- Common controller support: Works well with Arduino, ESP32, Raspberry Pi, and similar boards
Compare with similar products
| Product | Sensor style | Standout |
|---|---|---|
| NTC Thermistor Temperature Sensor Module 4pin | thermistor temperature sensor with I2C | Current item |
| DHT11 Digital Temperature/Humidity Sensor Module | temperature and humidity sensor with analog and digital output | digital output, humidity sensing |
| Thermistor NTC 3950 100K | thermistor temperature sensor | temperature sensing |
| MAX31865 RTD Platinum Resistance Temperature Sensor | temperature sensor with analog and digital output | analog output, digital output |
What you can build
This sensor is a good fit for thermostats, incubators, battery monitors, weather nodes, and thermal data loggers.
Starter bundles
Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus an I2C cable or jumper wires for quick setup and testing.
Recommended add-ons
Useful add-ons include probe mounts, thermal paste if needed, and a data logger, depending on how you plan to power, mount, and log the sensor.
Technical specifications
| Product | NTC Thermistor Temperature Sensor Module 4pin |
|---|---|
| Arduino sensor starter | NTC Thermistor Temperature Sensor Module 4pin + Arduino Uno R3 + jumper wires + 37 in 1 Sensor Kit for Arduino . |
| Typical application | temperature measurement and control |
| Typical operating voltage | Typically designed for 3.3–5 V systems (confirm exact range from module silkscreen or datasheet). |
| Electronics-ready signals | Designed to connect directly to popular microcontrollers with minimal glue circuitry. |
| Interface | Varies by module pins (commonly analog or I²C/SPI digital signals) |
| Check voltage | Confirm whether the module expects 3.3 V, 5 V, or a specific range before powering it. |
| Module type | temperature sensor |
| Form factor | Small PCB with 0.1" pins or solder pads |
Wiring & usage notes
Connect VCC, GND, SDA, and SCL to your controller. Use the correct board voltage and I2C address in your code. Sensor response time depends on airflow, mounting, and thermal contact. Keep heat sources and self-heating from nearby parts in mind.
What’s in the box
1 × NTC Thermistor Temperature Sensor Module 4pin
Frequently Asked Questions
What does the NTC Thermistor Temperature Sensor Module 4pin measure?
It is designed to measure temperature.
Can I use it with Arduino, ESP32, or Raspberry Pi?
Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
How do I connect this I2C sensor?
This version uses I2C, so you usually connect VCC, GND, SDA, and SCL.
What affects accuracy?
Power quality, wiring, mounting, target material, and the real environment can all affect the reading. It is best to test and calibrate in the final setup.
Is it good for prototyping?
Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →