Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Make Bench Work Easier with the Heat Shrink Tube 25mm 2M Polyolefin
The Heat Shrink Tube 25mm 2M Polyolefin is a practical choice for wiring, insulation, cable routing, and simple bench setup jobs. Heat Shrink Tube 25mm 2M Polyolefin This 25mm heat shrink tubing (2 meters) is a reliable way to insulate solder joints, reinforce wire splices, and protect cables from abrasion.
This product suits students, makers, repair work, and day-to-day bench tasks where a dependable cable and insulation accessory helps speed things up. Key details include diameter Product, size 25mm, and length 2M.
Important: Check size, length, and connector or wire type before buying so the part matches your setup.
Why you'll love it
- Diameter: Product
- Size: 25mm
- Length: 2M
- A practical supply for cable work and finishing jobs
- Useful for wiring, routing, bundling, or insulation
- Easy to keep on hand for quick fixes and installs
What you can build
It fits wiring jobs, cable cleanup, connector installs, power and signal routing, small repairs, and general bench organization.
Starter bundles
A practical starter setup pairs this item with Heat Shrink Tube 7mm 2M Polyolefin and Electrical Tape. That gives you a more complete bench-ready combination for common repair, soldering, or assembly work.
Recommended add-ons
Popular add-ons for this kind of product include Heat Shrink Tube 7mm 2M Polyolefin, Electrical Tape, and BST-5021 Multifunctional Wire Stripper Cutter Crimper Crimping Plier Tools For Harness Cable. These can help round out your setup and make day-to-day bench tasks easier.
Compare with similar products
| Product | Best for | Quick notes |
|---|---|---|
| Heat Shrink Tube 25mm 2M Polyolefin | insulating wire joints | Diameter: Product; Size: 25mm |
| Heat Shrink Tube 20mm 2M Polyolefin | insulating wire joints | Diameter: Product; Size: 20mm |
| Heat Shrink Tube 7mm 2M Polyolefin | insulating wire joints | Diameter: Product; Size: 7mm |
Technical specifications
| Product | Heat Shrink Tube 25mm 2M Polyolefin |
|---|---|
| Brand | Circuitrocks |
| Category | Cable and insulation accessory |
| Diameter | Product |
| Size | 25mm |
| Length | 2M |
Usage & compatibility notes
Check the size, length, and material before installation. For insulation products, make sure the selected size matches the wire bundle or joint you want to cover.
What’s in the box
? 1 × Heat Shrink Tubing — 25mm diameter, 2 meters length Why Buy from Circuitrocks? Fast shipping within the Philippines Local stock available Maker-focused support for choosing t
Frequently Asked Questions
What is this product mainly used for?
Insulating wire joints.
Is it suitable for maker and repair work?
Yes. It fits common bench, repair, or assembly tasks in electronics and DIY work.
Can beginners use it?
Yes. It is straightforward to add into a basic bench setup.
Should I check compatibility first?
Yes. Size, shape, range, and intended use matter for best results.
What pairs well with it?
Complementary tools or consumables from the same workflow usually make the setup more useful.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →