Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Make Bench Work Easier with the Chip Quik No-Clean Liquid Flux Pen 10ml - CQ4LF
The Chip Quik No-Clean Liquid Flux Pen 10ml - CQ4LF is a practical choice for helping solder wet pads, leads, and rework areas more easily. The Chip Quik No-Clean Liquid Flux Pen is great for all rework, solder, de-solder, and reflow applications!
This product suits students, makers, repair work, and day-to-day bench tasks where a dependable soldering flux helps speed things up. Key details include flux type No-Clean Liquid Flux (for Leaded and Lead-Free applications) and product weight 19.5g / 0.7oz.
Important: Use normal soldering safety, work in a ventilated area, and match your consumables and accessories to the job at hand.
Why you'll love it
- Flux Type: No-Clean Liquid Flux (for Leaded and Lead-Free applications)
- Product Weight: 19.5g / 0.7oz
- Helps solder flow better on pads and component leads
- Useful for touch-up work, rework, and SMD jobs
- Easy to keep on hand for bench soldering tasks
What you can build
This is useful for board repair, SMD rework, connector touch-ups, jumper wires, and small solder jobs where better wetting helps produce cleaner joints.
Starter bundles
A practical starter setup pairs this item with Solder Flux Rosin Paste 30g and Solder Lead 0.6mm Diameter 63/37 Soldering. That gives you a more complete bench-ready combination for common repair, soldering, or assembly work.
Recommended add-ons
Popular add-ons for this kind of product include Solder Flux Rosin Paste 30g, Solder Lead 0.6mm Diameter 63/37 Soldering, and Tweezers Basic. These can help round out your setup and make day-to-day bench tasks easier.
Compare with similar products
| Product | Best for | Quick notes |
|---|---|---|
| Chip Quik No-Clean Liquid Flux Pen 10ml - CQ4LF | solder flow and rework support | Flux Type: No-Clean Liquid Flux (for Leaded and Lead-Free applications); Product Weight: 1 |
| Solder Flux Rosin Paste 150g | solder flow and rework support | Soldering flux |
| Solder Flux Rosin Paste 15g | solder flow and rework support | Soldering flux |
Technical specifications
| Product | Chip Quik No-Clean Liquid Flux Pen 10ml - CQ4LF |
|---|---|
| Brand | Chip Quik Inc. |
| Category | Soldering flux |
| Flux Type | No-Clean Liquid Flux (for Leaded and Lead-Free applications) |
| Product Weight | 19.5g / 0.7oz |
Usage & compatibility notes
Use the product within its intended size and task range for better results. A well-matched tool usually feels easier to control and helps make bench work more consistent.
What’s in the box
1 × Chip Quik No-Clean Liquid Flux Pen 10ml - CQ4LF
Frequently Asked Questions
What is this product mainly used for?
Solder flow and rework support.
Is it suitable for maker and repair work?
Yes. It fits common bench, repair, or assembly tasks in electronics and DIY work.
Can beginners use it?
Yes. It is straightforward to add into a basic bench setup.
Should I check compatibility first?
Yes. Size, shape, range, and intended use matter for best results.
What pairs well with it?
Complementary tools or consumables from the same workflow usually make the setup more useful.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →