Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Measure Chemical Conditions with a Sensor Made for Embedded Projects
The Analog Dissolved Oxygen Sensor Meter Kit For Arduino Gravity is a chemical sensor module with analog output designed for water quality work, lab projects, and environmental monitoring. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.
Key details include Detection Range: 0~20mg/L; Pressure Range: 0~50PSI; Operating Voltage: 3.3~5.5V.
Important: Most gas and chemical sensors work best after warm-up and calibration. Readings can drift with temperature, humidity, and sensor age.
Why you’ll love it
- Gravity Analog Sensor Cable x1: Gravity Analog Sensor Cable x1
- Waterproof Gasket x2: Waterproof Gasket x2
- Useful spec: 1 year (normal use)
- Controller output: 0~3.0V
- Sensing range: 0~20mg/L
- Power range: 3.3~5.5V
Compare with similar products
| Product | Sensor style | Standout |
|---|---|---|
| Analog Dissolved Oxygen Sensor Meter Kit For Arduino Gravity | chemical sensor module with analog output | Current item |
| Atlas Scientific Dissolved Oxygen Kit | chemical sensor module | remote probe format |
| Atlas Scientific Industrial Dissolved Oxygen Probe | dust sensor | remote probe format |
| TDS Sensor Meter Analog for Arduino Gravity | TDS sensor with analog output | analog output |
What you can build
This sensor is a good fit for water test rigs, hydroponics monitors, lab logging, aquarium control, and environmental stations.
Starter bundles
Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard and jumper wires for quick setup and testing.
Recommended add-ons
Useful add-ons include calibration solutions, probe holders, and a data logger, depending on how you plan to power, mount, and log the sensor.
Technical specifications
| Product | Analog Dissolved Oxygen Sensor Meter Kit For Arduino Gravity |
|---|---|
| Electrode Service Life | 1 year (normal use) |
| Output Signal | 0~3.0V |
| Detection Range | 0~20mg/L |
| Pressure Range | 0~50PSI |
| Operating Voltage | 3.3~5.5V |
| Type | Galvanic Probe |
| Dimension | 42mm * 32mm |
| Cable Length | 2 meters |
Wiring & usage notes
Connect power and ground, then read the sensor output with an analog-capable input or external ADC. Stable power and a clean ground help reduce noise. Most gas and chemical sensors work best after warm-up and calibration. Readings can drift with temperature, humidity, and sensor age.
What’s in the box
1 × Analog Dissolved Oxygen Sensor Meter Kit For Arduino Gravity
Frequently Asked Questions
What does the Analog Dissolved Oxygen Sensor Meter Kit For Arduino Gravity measure?
It is designed to measure dissolved oxygen.
Can I use it with Arduino, ESP32, or Raspberry Pi?
Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
How do I connect this Analog sensor?
This sensor gives an analog-style signal, so you read it with an ADC or an analog-capable input.
Does it need calibration?
Yes. Chemical and gas sensors usually need warm-up time, calibration, and periodic checking if you want stable readings.
Is it good for prototyping?
Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →