1 1

Track Motion and Orientation with One Compact Module

The ADXL335 5V ready triple-axis accelerometer +-3g analog out is a motion sensor module with analog and digital output designed for motion tracking, robot balance, and orientation sensing. It is a practical fit for makers, students, and engineers who want reliable sensor data in embedded builds.

Key details include Interface: Analog and digital.

Important: Motion sensors often need calibration in software to get the best accuracy. Mounting angle and vibration can change the result.

Why you’ll love it

  • Useful spec: 19mm/0.75in
  • Sensor size: 19mm/0.75in
  • Easy wiring: Analog and digital
  • Maker-friendly build: Easy to use in prototypes, classroom projects, and custom electronics
  • Common controller support: Works well with Arduino, ESP32, Raspberry Pi, and similar boards
  • Project-ready sensing: robot balancing, gesture sensing, motion tracking, and navigation

Compare with similar products

Product Sensor style Standout
ADXL335 5V ready triple-axis accelerometer +-3g analog out motion sensor module with analog and digital output Current item
Triple-Axis Accelerometer ADXL326 5V ready +-16g analog out motion sensor module with analog output analog output, motion sensing
Accelerometer Triple Axis Breakout MMA7361 motion sensor module with I2C I2C interface, SPI interface
Triple-Axis Accelerometer Adafruit ±2 4 8g @ 14-bit MMA8451 motion sensor module with digital output digital output, motion sensing

What you can build

This sensor is a good fit for balancing robots, gesture controllers, motion loggers, wearables, and camera rigs.

Starter bundles

Pair it with an Arduino-compatible board, ESP32, or Raspberry Pi, plus a breadboard and jumper wires for quick setup and testing.

Recommended add-ons

Useful add-ons include a display, battery pack, and a solid mounting plate, depending on how you plan to power, mount, and log the sensor.

Technical specifications

Product ADXL335 5V ready triple-axis accelerometer +-3g analog out
Width 19mm/0.75in
Length 19mm/0.75in
Height 3.14mm/0.12in
Weight 1.27g/0.04oz
Interface Analog and digital
Category imu motion sensors

Wiring & usage notes

Many modules in this style expose both analog and digital pins. Use the analog pin for raw readings and the digital pin for threshold-based switching, if available. Motion sensors often need calibration in software to get the best accuracy. Mounting angle and vibration can change the result.

What’s in the box

1 × ADXL335 5V ready triple-axis accelerometer +-3g analog out

Frequently Asked Questions

What does the ADXL335 5V ready triple-axis accelerometer +-3g analog out measure? It is designed to measure motion, tilt, rotation, or orientation.
Can I use it with Arduino, ESP32, or Raspberry Pi? Yes. It is well suited for common maker and embedded platforms, as long as you power it at the correct voltage and match the signal level to your controller.
How do I connect this Analog and digital sensor? This module may provide both analog and digital outputs, depending on how you wire and read it.
Does it need calibration? Usually yes. Motion sensors often benefit from software calibration to improve offset, drift, and orientation accuracy.
Is it good for prototyping? Yes. It is a practical choice for learning, proof-of-concept builds, and small automation projects.

ADXL335 Triple-Axis Accelerometer ±3g - Analog Out

ADXL335 Triple-Axis Accelerometer ±3g - Analog Out

Out of stock

Product Code

AB010

₱ 345.00
₱ 345.00
Sale Sold out
View full details

Related Post