Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
SUNLU PLA Filament is a beginner-friendly 3D printer filament made for clean, smooth, and reliable FDM prints. It is a great choice for students, hobbyists, makers, and 3D printing users who need an easy material for daily printing.
PLA is one of the easiest filaments to print. It works well for display models, school projects, organizers, toys, decorations, prototypes, and light-use parts. With steady diameter control and low shrinkage, this filament helps reduce common print issues like warping and uneven feeding.
Why You’ll Like It
- Easy to print, even for beginners
- Good surface finish for clean-looking models
- Low shrinkage to help reduce warping
- Stable 1.75mm diameter for smooth feeding
- Works with most FDM 3D printers that use 1.75mm filament
What You Can Print
- School projects and learning models
- Display pieces and decorations
- Desk organizers and holders
- Prototype parts
- Toys, props, and hobby prints
Recommended Print Settings
| Material | PLA |
| Filament Diameter | 1.75mm |
| Diameter Accuracy | ±0.02mm |
| Nozzle Temperature | 200–240°C |
| Bed Temperature | 50–60°C with heated bed |
| Net Weight | 1kg per spool |
| Approx. Length | 330m per 1kg spool |
Printing Notes
For best results, keep the filament dry and sealed when not in use. Use a heated bed at 50–60°C for better adhesion. If you are using a non-heated bed, glue or another bed adhesive may help.
FAQ
Will this ship from Manila?
Yes — all stock ships from our Quezon City warehouse. Order before 4 PM weekdays for same-day cutoff via J&T or LBC.
Do you ship nationwide?
Yes. Metro Manila usually arrives next-day; provincial 1–3 working days.
Can I get this on a school PO or class order?
Yes — we accept Purchase Orders from accredited schools and universities. Contact us with your PO details and we'll process it.
Is this compatible with Arduino, ESP32, or Raspberry Pi?
Most parts work with common maker boards — check the description for specific pinout / voltage notes. If you're unsure, send us a message before ordering.
What's your return policy?
7-day inspection window for DOA units. Email proof of issue and we'll ship a replacement or refund. Used / installed parts are not returnable unless faulty.
Do you offer technical support?
Yes — questions land on our forum or via email, weekday or weekend. We've actually wired up most of what we sell.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →