Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Magnetic Hot Bed Sticker for Easy Print Removal — 235 × 235 mm
The Magnetic Hot Bed Sticker (235 × 235 mm) is a flexible, removable print surface designed for the Creality Ender 3 series and other printers with a 235 mm bed. Simply flex the magnetic sheet after printing and your parts pop right off — no scraping, no damage, no stuck prints.
Why use a magnetic bed?
- Easy removal: Flex the sheet and prints release cleanly
- No scraping: Protects the bed surface from damage
- Good adhesion when hot: Parts stick firmly during printing
- Quick swap: Magnetic base lets you peel off and replace the top sheet
Technical specifications
| Size | 235 × 235 mm |
|---|---|
| Type | Magnetic flexible steel sheet + adhesive base |
| Compatibility | Creality Ender 3 / Ender 3 Pro / Ender 3 V2 and similar |
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →