Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Zero safe and secure while also looking super sleek. You can use all of the connectors on the edges of the Pi: mini HDMI, microSD slot, microUSB power, and microUSB port. There's also a cut out to allow a 2x20-pin header to be soldered onto the Pi Zero.
The enclosure was designed by Mike Doell – just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your pocket, bookbag, or toolbox. It has slim openings for all your cables, an easy-to-access slot for your Micro SD card, slots for your Pi Camera, and a space for your GPIO cable to extend out from the Pi.
The Pi sits nicely in the base, latching to the corner pegs, and the lid fits snugly on top. If you want to break-out your Pi you can simply snap off the GPIO slot and add pHATs, Bonnets, GPIO cables and other accessories with ease.
This enclosure is only compatible with the Raspberry Pi Zero! It works with both the Zero v1.2 and v1.3 with camera connector.
This product comes with 2 polycarbonate pieces. Raspberry Pi Zero computer is **not** included. No other cables or connectors or accessories are included!
TECHNICAL DETAILS
- Product Dimensions: 70.0mm x 35.0mm x 13.0mm / 2.8" x 1.4" x 0.5"
- Product Weight: 13.9g / 0.5oz
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →