Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Raspberry Pi 3 Model B+ — Proven SBC for Kiosks, Media & IoT
A reliable Linux single-board computer with a 1.4GHz quad-core CPU, dual-band 802.11ac Wi-Fi, Bluetooth 4.2, and Gigabit Ethernet*. Keep the classic 40-pin GPIO for sensors, motors, and HATs—great for classrooms, makerspaces, and embedded builds.
1.4GHz quad-core • Dual-band Wi-Fi • BT 4.2 • GbE (USB 2.0) • 40-pin GPIO • PoE-ready
Why you’ll like it
- Stable platform: mature OS, drivers, and guides
- Better wireless: dual-band 2.4/5GHz 802.11ac
- Wired networking: Gigabit Ethernet (via USB 2.0)
- PoE-ready: supports official PoE HAT (sold separately)
What you can build
- Digital signage & dashboards
- Retro gaming & media centers
- IoT gateways & home automation
- Robotics & lab data loggers
Recommended add-ons
- Official 5V PSU (stable, micro-USB)
- Cases, heatsinks & fans
- microSD (A1/U1) for OS
- CSI cameras & HDMI/DSI displays
Technical specifications
| Processor | Broadcom BCM2837B0, quad-core 64-bit ARM Cortex-A53 @ 1.4GHz |
|---|---|
| Memory | 1GB LPDDR2 |
| Wireless | Dual-band 2.4/5GHz 802.11ac Wi-Fi; Bluetooth 4.2 (BLE) |
| Ethernet | Gigabit Ethernet over USB 2.0 (effective ~300 Mbps) |
| USB | 4 × USB 2.0 Type-A |
| Video | Full-size HDMI (up to 1080p60) |
| Camera/Display | 1 × CSI camera connector; 1 × DSI display connector |
| GPIO | 40-pin header (3.3V logic): I²C, SPI, UART, PWM, etc. |
| Storage | microSD (UHS-I supported) |
| Power | Micro-USB 5V; recommended 5V 2.5A PSU |
| Other | Power-over-Ethernet support via official PoE HAT; improved thermals |
| Dimensions | Approx. 85 × 56 mm (classic Pi footprint) |
*Ethernet is bridged through USB 2.0; real-world throughput is lower than 1Gbps.
Pinout & power notes
- GPIO is 3.3V-only. Use level shifters for 5V devices.
- PSU matters: Undervoltage causes throttling—use an official or high-quality PSU.
- Thermals: Add a small heatsink/fan for sustained loads.
What’s in the box
- Raspberry Pi 3 Model B+ board
- Power supply, case, storage, and cables sold separately.
FAQ
Pi 3B+ vs Pi 4 — which should I pick?
Pi 3B+ is stable and cost-effective for 1080p signage, gateways, and light robotics. Pi 4 adds dual 4K, more RAM, and USB 3.0 for heavier loads.
Which OS can I run?
Raspberry Pi OS is recommended. Many other ARM Linux images are available from the community.
Can I power it via PoE?
Yes—with the official PoE HAT and a compatible PoE switch/injector.
Do you ship nationwide?
Yes—fast shipping anywhere in the Philippines. Same-day processing on in-stock orders before cutoff.
Explore related: Cases & Cooling • Power Supplies • microSD • Cameras • Displays • Cables • HATs
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →