Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Arduino Due Board – 32-bit Microcontroller for Advanced Arduino Projects from Circuitrocks is ideal for DIY electronics builds.
Great for Arduino, ESP32, Raspberry Pi, and robotics or school projects here in the Philippines.
Arduino Due is the original 32-bit powerhouse in the Arduino lineup—built on the Atmel SAM3X8E (Arm® Cortex®-M3) running at 84 MHz. With 54 digital I/O, 12 PWM, 12 analog inputs (12-bit), and two 12-bit DAC outputs, it excels at fast control, data acquisition, and audio-capable projects. The Due keeps the familiar Mega footprint, adds **dual micro-USB ports** (native & programming), and uses **3.3 V logic** for modern peripherals—great for labs, robots, and embedded prototypes in the Philippines.
32-Bit Speed, Dual USB, Pro-Level I/O — In the Classic Mega Footprint
- Real 32-bit performance: 84 MHz Cortex-M3 for responsive UIs, faster control loops, and heavy libraries.
- Dual USB: program via the Programming port or use the Native USB (OTG) for HID, MIDI, MSC, or device/host applications.
- Precision analog: 12-bit ADC on 12 channels + dual 12-bit DACs for audio waveforms and reference outputs.
- Plenty of I/O: 54 digital pins, 12 PWM, multiple serial/I²C/SPI buses for complex builds.
- Mega/Due ecosystem: same footprint as Mega; wide library support and accessory compatibility (mind the 3.3 V logic).
What you can build
- Robotics & motion: multi-axis motor control, encoders, IMUs, ToF sensors with high-rate loops
- Audio & synthesis: tone generation and basic wave playback via the dual DACs + class-D amp
- DAQ & lab tools: 12-bit analog capture, filtering, and logging to microSD/RTC
- USB devices: HID keyboards/mice, MIDI controllers, mass-storage gadgets on the Native USB (OTG)
- Networked projects: add Ethernet (W5500) or Wi-Fi modules for dashboards and remote control
Starter bundles (quick picks)
- Due Lab: Due + 2× micro-USB data cables + sensor pack + 2.4–3.5″ TFT
- Audio Maker: Due + 3.5 mm breakout + amp module + PSU
- Robot Builder: Due + motor drivers + IMU/ToF +
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →