Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
This is a perfect power supply for your Raspberry Pi projects! While the Pi only needs 5V and a minimum of 700mA for normal operation, current consumption drastically increases when you add a peripheral like a mouse, a keyboard, or a NAS. When the current rating is not enough, the Pi works erratically and constantly reboots - a major annoyance. With a 3A supply like this, you can put your mind at ease. The plug is a US 2-prong version with input voltage up to 240VAC which is compatible with Philippine standard outlets.
Specifications:
- 73mm x 43mm x 27mm (2.9in x 1.6in x 1.1in)
- Cable Length: at least 1.2m
- Cable Diameter: 3.5mm (0.125in)
- Plug type: Micro USB
- Input: 110V-220V AC
- Output: 5V DC up to 3.0A
- 1 x Switching MicroUSB Power Supply
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →