Fingerprint Sensor AS608 - A Beginner's Guide
One touch can replace keys. This project uses an optical fingerprint sensor to enroll users and then grant access with a quick scan.
read tutorial →
Make Bench Work Easier with the 12V RGB 2/3/4 Cores LED Strip Extension Wire 1M
The 12V RGB 2/3/4 Cores LED Strip Extension Wire 1M is a practical choice for wiring, insulation, cable routing, and simple bench setup jobs. The 12V RGB LED Strip Extension Wire is available in three variations: 2-pin (2P), 3-pin (3P), and 4-pin (4P).
This product suits students, makers, repair work, and day-to-day bench tasks where a dependable cable and insulation accessory helps speed things up. Key details include voltage Below 72V, power 150W, and material Tin-clad copper.
Important: Check size, length, and connector or wire type before buying so the part matches your setup.
Why you'll love it
- Voltage: Below 72V
- Power: 150W
- Material: Tin-clad copper
- Length: 1 meter per order (continuous if more than 1 meter)
- Voltage: 12V
- A practical supply for cable work and finishing jobs
What you can build
It fits wiring jobs, cable cleanup, connector installs, power and signal routing, small repairs, and general bench organization.
Starter bundles
A practical starter setup pairs this item with Heat Shrink Tube 7mm 2M Polyolefin and Electrical Tape. That gives you a more complete bench-ready combination for common repair, soldering, or assembly work.
Recommended add-ons
Popular add-ons for this kind of product include Heat Shrink Tube 7mm 2M Polyolefin, Electrical Tape, and BST-5021 Multifunctional Wire Stripper Cutter Crimper Crimping Plier Tools For Harness Cable. These can help round out your setup and make day-to-day bench tasks easier.
Compare with similar products
| Product | Best for | Quick notes |
|---|---|---|
| 12V RGB 2/3/4 Cores LED Strip Extension Wire 1M | simple bench wiring jobs | Voltage: Below 72V; Power: 150W |
| Cable Tie Nylon 4 x 200mm 50PCS | cable management | Material: Nylon; Length: 200mm |
| Electrical Tape | fast insulation and bundling | Material: PVC; Length: 10m |
Technical specifications
| Product | 12V RGB 2/3/4 Cores LED Strip Extension Wire 1M |
|---|---|
| Brand | Circuitrocks |
| Category | Cable and insulation accessory |
| Voltage | Below 72V |
| Power | 150W |
| Material | Tin-clad copper |
| Length | 1 meter per order (continuous if more than 1 meter) |
Usage & compatibility notes
Check the size, length, and material before installation. For insulation products, make sure the selected size matches the wire bundle or joint you want to cover.
What’s in the box
1 × 12V RGB 2/3/4 Cores LED Strip Extension Wire 1M
Frequently Asked Questions
What is this product mainly used for?
Simple bench wiring jobs.
Is it suitable for maker and repair work?
Yes. It fits common bench, repair, or assembly tasks in electronics and DIY work.
Can beginners use it?
Yes. It is straightforward to add into a basic bench setup.
Should I check compatibility first?
Yes. Size, shape, range, and intended use matter for best results.
What pairs well with it?
Complementary tools or consumables from the same workflow usually make the setup more useful.
Manila stock. Order before 16:00 PHT, ships today via J&T or LBC. Provincial: 1–3 working days.
Schools / class POs: we accept Purchase Orders for accredited schools and universities. contact us with your PO details.
Returns: 7-day inspection window for DOA units. Email proof of issue and we ship a replacement.
Customers also bought
Build with this board
Thumb Joystick - A Beginner's Guide
Wire a joystick to your Arduino, read X/Y, then print UP / DOWN / LEFT / RIGHT to the serial monitor.
read tutorial →Motor Drive (BTS7960 43A) - A Beginner's Guide
Bench-test a 43 A motor driver before wiring the full project. Catches weak power, mis-pinning, and dead boards before they cost you time.
read tutorial →Raspberry Pi Pico (RP2040) - A Beginner's Guide
Coming from UNO and the Pico won't show a COM port? Here's the BOOTSEL trick, the driver fix, and the first sketch that actually works.
read tutorial →Notes from the bench
Ask the community
Project Showcase — show what you built
Share what you built. Photos, BOM, what worked, what didn't.
view thread →How to ask a good question (and actually get answers)
Symptom + what you tried + clear photo = answers within hours.
view thread →ESP32 brownout when wiring a sensor — fixes that worked
Brownout reset when adding a sensor? Notes on supply decoupling and GPIO checks.
view thread →First Arduino — sketch upload error, what to try?
Upload failing on your first Uno? Driver, COM port, board match — checklist inside.
view thread →