How to Build a Piso WiFi Vendo in the Philippines (Full Parts List + Setup)
Share
A piso wifi is a coin operated internet station. Drop a coin, get a block of time online. It is one of the easiest small businesses to run in the Philippines because the hardware is cheap and the software is free.
Most local builds run LPB Piso WiFi, a free firmware image that flashes onto a small single board computer. The board handles the timer, the rates, and the admin page. A coin acceptor tells the board when someone paid.
This guide covers the full build: parts, wiring, and first time setup. Every part links to a component we keep in stock.
The parts list
| Part | Why you need it | In stock |
|---|---|---|
| Orange Pi One 1GB (or Orange Pi PC) | Runs the LPB firmware. The One is the common budget pick; the PC has more ports. | Orange Pi One 1GB · Orange Pi PC |
| microSD card (8GB+) | Holds the firmware image. Class 10 or better. | microSD reader for flashing |
| Coin acceptor | Reads coins and signals the board. Programmable type lets you set which coins count. | Multi-Coin Selector · Programmable 4-Coin |
| 5V power supply | Powers the board and the coin acceptor. The 30A unit has headroom if you add more. | Switching Power Supply 5V |
| DC power cable | Connects the supply to the Orange Pi barrel jack. | Orange Pi USB to DC cable |
| LAN cable | Links the board to your router or modem for internet. | Cat5 RJ45 LAN cable |
| Enclosure | Keeps it dust free and tamper resistant. | Orange Pi One Acrylic Case |
You also need a working internet line (fiber, DSL, or mobile hotspot) and a router the piso wifi can sit behind.
How it goes together
- Flash the firmware. Download the LPB Piso WiFi image, write it to the microSD with a tool like balenaEtcher, then put the card in the Orange Pi.
- Wire the coin acceptor. The acceptor has a signal wire that goes to a GPIO pin on the board, plus power and ground. Match the acceptor to 5V. (Confirm the exact pin against the firmware version you flashed.)
- Power up. Connect the 5V supply through the DC cable. The board boots straight into the piso wifi system.
- Plug in the internet. Run the LAN cable from your router to the Orange Pi.
- Open the admin page. From a device on the piso wifi network, go to http://10.0.0.1/admin in a browser. That is where you set rates, time per coin, and the pause feature.
Setting your rates
The admin page is where the money decisions happen. Common starting point: 1 peso for a few minutes, with bigger coins giving proportionally more time. Test with real coins before you put it out.
The pause time feature is worth knowing. It lets a customer stop their timer and come back later without losing minutes. A lot of the searches for "10.0.0.1 piso wifi pause time" are people looking for exactly this setting, so it is a real selling point for your customers.
Run it 24/7 once it is stable. The board sips power and there is no reason to switch it off overnight.
Common questions
Is LPB Piso WiFi free?
Yes. The firmware image is free to download and use. You only pay for the hardware.
Can I use a Raspberry Pi instead of an Orange Pi?
Some builds do, but the LPB image is built around the Orange Pi One and PC, so those are the safe choice. We stock both.
How much to start?
The board, coin acceptor, power supply, and cables come to a low entry cost. Check the linked parts for current pricing.
What internet speed do I need?
Any stable line works for casual browsing. For many users at once, a faster plan keeps everyone happy.
Build it with parts that are in stock
Everything in this guide ships from circuit.rocks. Start with the Orange Pi One and a coin acceptor, add the 5V supply, and you have the core of a working piso wifi.