Water Flow Sensor G1/4

Water Flow Sensor G1/4

Water Flow Sensor G1/4


The Water Flow Sensor G1/4 consist of magnetic core, a rotating impeller, an external casing and a hall-effect sensor. The principle is that when water flows through the inside, the rotor rotates and it enables the magnetic core to trigger action with the hall-effect sensor. This is to determine the rate of flow. The Water Flow Sensor G1/4 outputs corresponding pulse signals which the user can use to detect flow speed. This module is perfect for your Arduino projects to automate water or coffee dispenser. Here is the basic formula:

The water flow sensor outputs pulse proportional to the water flow with: Pulse Frequency = Flow* 98.That is, if the output frequency is 48, then the water flow: 48/98= 0.5(L/min).

QUICK SPECS:

  • Mini. Working Voltage: DC 4.5V
  • Max. Working Current: 15mA (DC 5V)
  • Working Voltage: DC 5V~24V
  • Flow Rate Range: 0.3~6L/min
  • Load Capacity: ≤10mA (DC 5V)
  • Operating Temperature: ≤80℃
  • Liquid Temperature: ≤120℃
  • Operating Humidity: 35%~90%RH
  • Water Pressure: ≤2.0MPa
  • Storage Temperature: -25~+ 80℃
  • Storage Humidity: 25%~95%RH

Write a review

Note: HTML is not translated!
    Bad           Good

  • Brand: Elecrow
  • Product Code: SOT80014WF
  • Availability: 13
  • ₱289

Tags: water flow sensor, g1/4, sensors, iot flow-fluid, velocity