Water Flow Sensor For Arduino 1/8"

Water Flow Sensor For Arduino 1/8"


The Water Flow sensor measures the rate of a liquid flowing through it. It consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor will rotate and the rate of rotation will vary with the rate of flow. The hall effect sensor will then output a pulse width signal. Connect it to a micro-controller and you can monitor multiple devices such as your coffee maker, sprinkler or anything else, and control the water flow rate to suit your needs!

SPECIFICATION
  • Inner Diameter: 4 mm
  • Outside diameter: 7 mm
  • Proof Water Pressure:
  • Water Flow Range: 0.3-6 L/min
  • Voltage Range: 5~12 V
  • Operating Current: 15 mA (DC 5V)
  • Insulation Resistance: >100 MΩ
  • Accuracy: ±5% (0.3-3L/min)
  • The Output Pulse High Level: >4.5 VDC (DC input voltage 5 V)
  • The Output Pulse Low Level:
  • Output Pulse Duty Ratio: 50% ± 10%
  • Water-flow Formula: 1L = 5880 square waves
  • Working Humidity Range: 35% ~ 90% RH (no frost)
  • Dimension: 58*35*26 mm/2.28*1.37*1.02 inches
  • Weight: 30g

Write a review

Note: HTML is not translated!
    Bad           Good

Water Flow Sensor For Arduino 1/8"

  • Brand: OEM
  • Product Code: AB705
  • Availability: 17
  • ₱215