GPRS / GSM Shield For Arduino SIM900

GPRS / GSM Shield For Arduino SIM900

GPRS / GSM Shield For Arduino SIM900

The GPRS / GSM Shield For Arduino SIM900 provides you a way to use the GSM cell phone network to receive data from a remote location,it delivers GSM/GPRS 850/900/1800/1900MHz signals for Audio, SMS and GPRS Service. It is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. This GPRS/GSM shield is configured and controlled via its UART using AT commands. The GPRS Shield Also has 6 GPIOs,2 PWMs and 1 ADC(They are all 2V8 logic), which can be controlled by AT commands of Controller. 

Furthermore, to make your project more flexible and efficient, we have prepared for you two different antennas,One is the traditional GPRS antenna, which is more sensitive; another one is on-board antenna, this antenna is more compact and easy to install, you can put the whole project to a case more easily,with this kind of antenna. 

You can have a browse and learn the basic usage of this Shied in the Instructables


  • Quad-Band 850/ 900/ 1800/ 1900 MHz
  • GPRS multi-slot class 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
  • Class 4 (2 W @850/ 900 MHz)
  • Class 1 (1 W @ 1800/1900MHz)
  • Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
  • Low power consumption: 1.5mA(sleep mode)
  • Operation temperature: -40°C to +85 °C
  • 2-in-1 headset jack
  • GPRS Shield PCBA x1
  • Antenna x1
  • PCB Antenna x1


Write a review

Please login or register to review
  • Brand: Elecrow
  • Product Code: MCS01101S
  • Availability: 13
  • ₱1,789

Tags: shield gprs/gsm, for, arduino, shields cellular-wifi, arduino-shield-projects cellular-wifi-ethernet, arduino-wifi, arduino-gps, arduino-gsm, arduino-gprs, arduino-cellular, arduino-shield, arduino-projects sim900