Ethernet Shield W5100 for Arduino

Ethernet Shield W5100 for Arduino

Ethernet Shield W5100 for Arduino

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. 

The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled. 

There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino and Mega (using the Ethernet library). The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4.


  • Operating voltage 5V (supplied from the Arduino Board)
  • Ethernet Controller: W5100 with internal 16K buffer
  • Connection speed: 10/100Mb
  • Connection with Arduino on SPI port
  • The Shield  contains a number of informational LEDs
  • PWR: indicates that the board and shield are powered
  • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
  • FULLD: indicates that the network connection is full duplex
  • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
  • RX: flashes when the shield receives data
  • TX: flashes when the shield sends data
  • TX: flashes when the shield sends data
  • COLL: flashes when network collisions are detected

Wiki & External links

Write a review

Please login or register to review
  • Views: 5184
  • Brand: Elecrow
  • Product Code: ASW51001E
  • Availability: 2
  • ₱799

Tags: shield ethernet, w5100, for, arduino, shields cellular-wifi, arduino-shield-projects cellular-wifi-ethernet

This power module is designed for the standard breadboard. Its tiny design doesn't waste your protot..

This RFID kit includes a 13.56M RF reader module, which makes use of the RC522 IC, plus two (2) ..

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a l..

This HC-SR04 has stable performance and high ranging accuracy. Compared to the Sharp IR ranging modu..

Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor and a hal..

PHP 25 per 5 piecesThis Breadboard jumper wire male to female end connectors...

PHP 25 per 5 pieces of wire This is a splittable 40 pin 30mm length dual male jumper wire for 2..

PHP 25 per 5 pieces of wire200mm dual-female dual-row DuPont jumper switch multiple colours. Both te..

The reed switch is an electrical switch operated by an applied magnetic field. When the device is ex..