DFRobot Arduino Mega 2560

DFRobot Arduino Mega 2560

DFRobot Arduino Mega 2560

NEW VERSION! This is the upgraded DFRobot Arduino Mega 2560 which is now fully compatible with Arduino Mega 2560 R3. The DFRobot Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; Connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove, Diecimila or Uno.

One cool thing about our DFRduino microcontrollers is that the hearders with different colors are used to differentiate I/O ports in an relatively easy way:

  • Red indicates Power Section 
  • Blue indicates Analog I/O
  • Green indicates Digital I/O. 

This kind of correspondence match exactly the same with our sensors, making it even cooler and more user-friendly.

The R3 board enjoys following new features:

  • Added SDA and SCL pins that are close to AREF pin and two other new pins close to RESET pin, allowing voltage adaptation with IOREF. Our shields will be fully compatible both with the AVR boards operating @5V and Due @3.3V in future.
  • Improved RESET circuit
  • Replacing the Atmega 8U2 with Atmega 16U2

SPECIFICATION

Compatible with Arduino Mega 2560 R3

  • Microcontroller: ATmega2560
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7 ~ 12V
  • Digital I/O Pins: 54 (of which 14 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
The Mega is compatible with:

DOCUMENTS

SHIPPING LIST

  • DFRduino Mega 2560 V3.0  x1

Write a review

Please login or register to review
  • Views: 4756
  • Brand: DFRobot
  • Product Code: DFR0191
  • Availability: 6
  • ₱1,807

Tags: boards, dfrobot, arduino-mega, 2560, arduino-projects, authorize-dfrobot-distributor compatible

The Crowduino Nano 328 is a small, complete, and breadboard-friendly microcontoller based on the ATm..
₱550

This is a high quality AC/DC adapter with overheat protection and short circuit protection..
₱225

This RFID kit includes a 13.56M RF reader module, which makes use of the RC522 IC, plus two (2) ..
₱235

There are many ultrasonic ranger module on the market, but sometimes, these kind of sensor needs to ..
₱500

This is an infrared distance switch. It has an adjustable detection ranging from 3cm to 80cm. It is ..
₱355

PHP 25 per 5 piecesThis Breadboard jumper wire male to female end connectors...
₱25

PHP 25 per 5 pieces of wire This is a splittable 40 pin 30mm length dual male jumper wire for 2..
₱25

PHP 25 per 5 pieces of wire200mm dual-female dual-row DuPont jumper switch multiple colours. Both te..
₱25

The reed switch is an electrical switch operated by an applied magnetic field. When the device is ex..
₱15

This HC-SR04 has stable performance and high ranging accuracy. Compared to the Sharp IR ranging modu..
₱125