DC-DC Module 5A 180KHz 36V

DC-DC Module 5A 180KHz 36V

DC-DC Module 5A 180KHz 36V

This module integrated a voltage meter with the DC-DC converter – XL4015, with this module, you can monitor your project much more easier. The voltage meter can measure the input voltage or output voltage, which is adjustable by the potentiometer, with a precision of ±0.1V.Note that the voltage meter would not work if the input voltage below 4V. Press the button (right) to switch voltage to measure, between the input voltage and output voltage. There are 2 LEDs to indicate which voltage is measuring by the voltage meter. And it has a Power indicator LED (GREEN). You can change the input or output voltage measurement by Short press the button on the right side ,and also can close the voltage meter by pressing the button on the left side. This module can be also calibrated manually as following method:

1. Power up the module with a stable and accurate power supply , such as a 5V power supply, then shot press the button on the right side to select which one do you need to adjust (input or output), and long pressing (press time > 2S) the button(right) makes the module enter the calibration model, after releasing the button, the related LED would blink to indicate which voltage is now calibrating, and the numeric display blinks the correction value.

2. Short press the button to change the correction value, Short press the button on the right side, voltage increases one unit, Short press the button on the left side, voltage reduce one unit, for example, if your power supply is 5V, but the result of voltage meter is 4.8, you need to set the value to 5V.

3. Long press button on the right side(press time ≈ 2S), to store the voltage correction value.

4. Calibrate the output voltage in the same way above; The correction value will be stored in nonvolatile memory.


  • Input Voltage: 4V~38V (1.5V higher than the output at least)
  • Measurement Accuracy:±0.05V
  • Adjustable Output Voltage: 1.25V~35V.
  • Output Current: 5A
  • Dimension: 60mm x 37mm x 18mm

Wiki & External links

Write a review

Please login or register to review
  • Views: 2903
  • Brand: Elecrow
  • Product Code: PC0575DC
  • Availability: 20
  • ₱405

Tags: dc-dc, module, 180khz, 36v, power, supply dc-buck-booster-step-up-down

The Sharp distance sensors are a popular choice for many projects that require accurate distance mea..

Arduino LM2577 DC-DC Adjustable Step-up Power Converter Module . The LM2577 series of regulators are..

This product includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 ..

This power module is designed for the standard breadboard. Its tiny design doesn't waste your protot..

This is an infrared distance switch. It has an adjustable detection ranging from 3cm to 80cm. It is ..

PHP 25 per 5 piecesThis Breadboard jumper wire male to female end connectors...

PHP 25 per 5 pieces of wire This is a splittable 40 pin 30mm length dual male jumper wire for 2..

PHP 25 per 5 pieces of wire200mm dual-female dual-row DuPont jumper switch multiple colours. Both te..

The reed switch is an electrical switch operated by an applied magnetic field. When the device is ex..

This HC-SR04 has stable performance and high ranging accuracy. Compared to the Sharp IR ranging modu..