Skip to product information
1 of 5

Nano CH340 USB driver Arduino Compatible

Nano CH340 USB driver Arduino Compatible -  Arduino boards have different kinds that fit different applications. One variety of these boards is a Nano. This board is compact and used for small-scale projects, but it also has the capabilities of an Arduino Uno. The only difference they have is the size, as well as the cable used for uploading programs.

This board has an integrated CH340 chip. It is similar in ESP boards, as well as clones of Arduino Uno and Mega. It has 22 I/O pins, 14 of which are for digital I/O, with 6 having PWM controls, and 8 analog pins. It also supports the use of SPI, I2C, and UART communications. Each I/O pin of the Arduino Nano produced around 40mA current. 

This board has an operating voltage of 5V to 20V. Recommended 7V to 12V usage. It can have an input voltage from 0V to 5V. The board also has 16kb FLASH memory and 1kb EEPROM.
This board is programmable with the use of a USB mini cable. Unlike Arduino Uno, it has no built-in DC jack for an external supply. Powering it up is possible through its USB port, or directly connecting it with its VIN and GND pins. This board does not come with a USB cable.

Nano CH340 USB driver Arduino Compatible – Description


The CH340 USB Driver brings solutions for a varied range of operating systems and applications. The Nano Ch340 Driver can be integrated across different platforms and Arduino is one of them to place the driver for better execution. Since Arduino boards reflect a good blend of kinds to meet the purposes of different applications. Arduino Nano is one of the most sought-after units that are perfectly designed for compact and small-scale projects. However, the unit also finds the capabilities of an Arduino UNO to be more versatile and potent.

When it comes to installing the CH340 USB Driver, it can automatically be installed on various operating systems. We can come across a good range of operating systems in the market. For installations, a user needs to connect the driver chip to the computer system through a USB port. Further, the driver unit may get populated on a breakout development board depending upon the application.

Since the Arduino Nano is assembled to accommodate compact-sized projects, it can also support the strengths of Arduino UNO. What can differentiate the units is the size of both units. Moreover, the cable used for uploading programs can also be a realistic approach to different types of systems. Users will get a CH340 chip integrated on the board. The greater thing to mesmerize you is its ability to look like ESP boards alongside a range of clones of Arduino UNO and Mega.

CH340 USB Driver – Installation


Users can plug CH340 USB to serial converter into your system. Then, windows will identify the chip and start downloading the drivers. In the end, it will prompt a message of successful installation to convey to you the final execution.

Furthermore, you can install the CH340 chip manually by a right-clicking on My Computer. Get through properties and choose Device Manager from the left control panel. Now, you can expose the USB options available and right-click on CH340. Further, you can select update driver before you hit the browse option.

The operating voltage of the board ranges between 5V and 20V. Users are recommended to execute 7V to 12V voltage for their projects. Similarly, the input voltage also remains from 0V to 5V with 16kb Flash memory and 1kb EEPROM. Also, the integrated board can be programmed using a USB mini cable. You’ll find no DC jack to supply data externally.

Why is the port in Arduino not displayed?


A broken USB connection is the most frequent cause of the board not appearing on a port. A data USB cable must be used to connect the board to your computer. Check to see if the USB cable has any damage. Try using a different device to test your cable or an alternative cable if necessary. Check if the computer has detected any device on the port. It's best to separate the two scenarios:

The board is a device, but the computer does not identify it as an Arduino board. The board name is not displayed and sketches cannot be posted, despite the port being available in the port menu (read this if using the classic Nano).
  • The computer is in no way registering the board.
  • Follow these procedures to see if the board is being identified as a device:
  • Remove the board's connection to the PC.
  • The port list, please Resources > Port There may still be some ports listed. Close the menu after making a note of this.
  • Your board and computer should be connected.
  • Activate Tools > Port. Your board's port ought to now show up in the list as a new port.
Continually go forward based on the outcome:
  • No equipment was found
  • Unwanted device discovered
  • In the absence of a device
  • Look overboard connections
Note: If the port menu is already open, you must close it and then reopen it in order for the list to update.
  • A broken USB connection is the most frequent cause of the board not appearing on a port.
  • A data USB cable must be used to connect the board to your computer.
  • Check to see whether the USB cord has any damage. Use a different device to test your cable, or try a different cable.
  • An alternative USB port on your computer might work.
  • If at all possible, avoid using a hub and connect the board directly to your PC.
  • Disconnect anything from the board's pins, notably those for 0(RX) and 1. (TX).
  • Restart the board.
  • The board might be in a situation where it is unable to communicate on the port.
  • The reset button can be found on the board.
  • Hit the button twice in a row.
  • Re-check the port menu.
Note: To update the list if the port selection is open, you must close and reopen it.
  • Incorrect detection of a device
  • Verify the firmware for your USB-to-Serial device.
  • The USB-to-Serial firmware on your board could be corrupted if it's an Arduino Uno (Rev 1 or Rev 3) or an Arduino Mega.
Windows:
  • Go to Device Manager and take a look at the "Other Devices" section..
MacOS:
Activate the System Information app.
Verify the USB section under Hardware.
Linux:
  • Make use of a device manager of your choosing, like hard info Launch Terminal and type sudo apt install hard info to install hard info. Run hard info thereafter to access Devices > USB Devices and perform a search. Uno and Mega boards can be identified as any of the following when USB-to-Serial firmware is missing or corrupt:
  • Unknown instrument
  • Composite Device with an Unknown USB Device
  • USB gadget
  • DFU ATmega16u2
  • DFU for Atmega8U2
By flashing the USB-to-serial firmware in DFU mode, you can cure the problem if your board is listed as fewer than one of these names. If you are using the standard Nano unlike most other boards, an Arduino Nano connected to a port won't display the board name.
Remove the board's connection to the PC.
Tools > Port should now be opened. There may still be some ports listed. Close the menu after making a note of this. Your board and computer should be connected. Activate Tools > Port. Your board's port ought to now show up in the list as a new port.

Nano CH340 USB driver Arduino Compatible

Nano CH340 USB driver Arduino Compatible

Out of stock

Product Code

SKU:2349

Regular price ₱ 159.00
Regular price Sale price ₱ 159.00
Sale Sold out
View full details

Related Post