Skip to product information
1 of 2

Charger 7.4V Lipo Battery

Charger 7.4V Lipo Battery - A 7.4V lipo battery is a type of rechargeable lithium polymer battery that is commonly used in remote-controlled vehicles, drones, and other electronic devices. These batteries are known for their high energy density and long-lasting performance. In this article, we will discuss how to use a 7.4V lipo battery, how it works, and other important information that you should know.

How to Use a 7.4V Lipo Battery?

Charge the Battery - Before using your 7.4V lipo battery, it is important to fully charge it. This can be done using a lipo battery charger that is specifically designed for this type of battery.

Insert the Battery - Once the battery is fully charged, you can insert it into your device. Make sure to connect the positive and negative terminals correctly to avoid damaging the battery or your device.

Use the Device -Once the battery is connected, you can turn on your device and begin using it. Keep in mind that the battery's performance will decrease as it is used, so it is important to monitor the battery level and recharge it when necessary.

How Does Charger 7.4V Lipo Battery Works?

A 7.4V lipo battery is made up of several lithium polymer cells that are connected in series. These cells work together to provide power to your device. The battery's voltage is determined by the number of cells that are connected in series. In the case of a 7.4V lipo battery, it has two cells connected in series, which gives it a voltage of 7.4V.

When the battery is being used, the lithium ions in the cells are moving back and forth between the positive and negative terminals. This movement of ions creates a flow of electricity, which is used to power your device. When the battery is being charged, the process is reversed, and the lithium ions are moved back into the cells, recharging the battery.

Other Important Information

Lipo Battery Safety -Lipo batteries can be dangerous if not handled properly. It is important to always charge and store your lipo batteries in a safe place and to never overcharge or over discharge them.

Battery Capacity - The capacity of a lipo battery is measured in milliampere-hours (mAh). This number tells you how much energy the battery can store. The higher the mAh, the longer the battery will last between charges.

Battery Life -Lipo batteries have a limited lifespan, and their performance will decrease over time. It is important to regularly check the battery's performance and replace it when necessary.

A 7.4V lipo battery is a powerful and reliable type of rechargeable battery that is commonly used in remote-controlled vehicles, drones, and other electronic devices. By following the proper usage and safety guidelines, you can ensure that your 7.4V lipo battery will provide long-lasting performance for your device.

Charger 7.4V Lipo Battery. A Difficult Choice Made Easy

The choice of LiPo batteries and battery chargers can be overwhelming. In the past, with older RC cars and NiCd batteries, you could just take the battery, plug it into a wall charger, and leave it. After several hours, or preferably overnight, your battery would be ready for use again. LiPo batteries are a completely different animal.

If you don’t select a higher-end charging station, they will require a lot of your time and attention. And if you don’t treat them right, they can be downright dangerous.

But with this 7.4V Lipo Battery Charger, things become just as easy as before. This charge is able to take in AC100-240V 50/60Hz power and output at DC 8.5V 1.5A. It comes with standard DC 2.1mm (Female/Male) interface which is Arduino compatible, and has short-circuit protection, reverse-connection protection, over-charge protection and backflow protection protection. A perfect companion to the 7.4V Lipo Battery (2-cell pack).

SPECIFICATION

  • Input: AC100-240V 50/60Hz
  • Output: DC 8.5V 1.5A
  • Interface: DC 2.1mm (Female/Male) (Arduino compatible)
  • Led Indicator: Red (charging), Green (charged), Green Flash (protection mode triggered)
  • Support Battery: 7.4V Lipo Battery (2-cell pack)
  • Protection: converse connection, over-charge and discharge over-loading, short-circuit protection.
  • Certification: CE,UL,FCC,GS
  • Size: 70 mm × 75 mm × 40 mm(2.76" x 2.95" x 1.57")
  • Weight:  90g

SHIPPING LIST

  • Charger 7.4V Lipo Battery x1
  • DC 2.1mm female to female connector x1

Charger 7.4V Lipo Battery

Charger 7.4V Lipo Battery

Out of stock

Product Code

SKU:FIT0398

Regular price ₱ 835.00
Regular price Sale price ₱ 835.00
Sale Sold out
View full details

Related Post